12 Tips to Pass Your Roof Inspection in Clearwater Florida

clearwater florida roof

Florida is a city that lies directly in the path of severe weather events. Hurricanes and rainstorms often wreak havoc in the area. So, the homeowners must be forever mindful of the condition of their roofs. The most essential proactive pursuit is periodic roof inspections.

Clearwater Roof inspections are indispensable, at least once a year, for assessing the condition of your roof. It helps you to demand an ample insurance claim, whenever it is necessary. Besides, a more crucial benefit is ensuring the safety of your family and property.


How to pass your roof inspection


1. Correct roof leaks in Clearwater, Florida

Roof leaks, when detected in their early stage, save considerable expense. While inspecting your roof from the attic, you may notice dark patches of moisture. If you get a stuffy feel while in your attic, it means that the humidity has passed the acceptable range. It means either your vents are faulty or there is minor water damage on your roof that has been developing unnoticed. Patches of mold developing at the corners of the roof also indicate the presence of a minor roof leak. So, it is time for you to call a roofer for further inspection and remediation of the damage before it gets worse.

2. Repair faulty drainage system 

The drainage system consists of gutters and downspouts. Any block in one or both components causes the system to overflow, damaging the fascia and soffit. Water, thus entering your roof, will affect your roof adversely. Regular cleaning of the gutters and downspouts will prevent this issue. 

3. Replace missing or broken shingles

Florida is a high wind affected area.  The strong winds are likely to blow your shingles away as a whole or parts of them. Both cases cause water to enter your roof. So, it is essential to replace these shingles.

roof damage

4. Correct curled and buckled shingles

The extreme summers in Clearwater Florida often prove to be dangerous to your roof. The shingles would curl in the intense heat or buck in the middle. They leave leeway for water to seep into the roof. If your roof has not yet passed its prime, you can repair these damages by smoothing the edges of the curled shingles and press to straighten the bucked ones. Then, you can stick then place with glue or fix them mechanically.

chimney roof problems

5. Look for damages on the chimney after a strong storm

Your chimney can lose its topmost bricks whole or partly when flying tree limbs hit it. In some cases, wind displaces the chimney cap. You should repair it on an emergency basis to avoid further water damages to the roof.

6. See that the ridges of the roof are free of damages

The ridges are the parts that brave the fury of the climate because they happen to be the highest point of the roof. The wind and rain affect the ridges to the maximum extent. It calls for a special inspection of the roof ridges. Correction of any damage is necessary.

7. Rusted or loose nails

If you detect rusted or loose nails on your roof, you can be sure that they have started roof damage. The rusted nails will crack the shingles, thereby creating space for water entry. The loose nails allow water to seep in through their bases. In both cases, you can replace them to make the area water-tight.

8. Clear the bio-growth

If your roof is advanced in age, moss, and lichen grow in patches. These bio-growth patches will deteriorate the shingles over time. So, as soon as you notice these growths, clean the part thoroughly and wash it with a weak bleach solution to hold back the repeated growth.

9. Clean the surface of the roof

Florida is a windy city. The wind increases the debris build-up on your roof. The accumulated debris and leaves will result in water pooling on your roof. The water thus collected under the debris build-up slowly trickles down the gaps between the shingles to cause water damage. It is a good strategy to sweep your roof occasionally.

10. Inspect the condition of flashings and rubber housings

The flashings around the rooftop structures are vulnerable places. If the roofing cement cracks or the metal sheets corrode, the resulting gaps prove detrimental to your roof’s health. It is the same case with the rubber housings around various vents. Rubber is likely to crack in due course. Repairing flashings and replacing the rubber boots will deter the damage.

roof repair

11. Ensure the optimal functioning of the roof vents

Roof vents are installed to facilitate air circulation in your attic. If the vents do not work properly, the moisture accumulation will rot your roof structures from inside. It will cause the wooden parts to develop mold and mildew and rot sets in. Frequent check-up of the vents is a good idea. 

12. Make sure the soffit and fascia are damage-free

These are the peripheral structures that guard the extremities of your roof. It is crucial to keep them intact. Repairing any damage to them, even though it is trivial is an essential maintenance strategy. If you can keep the above-said components of your roof whole, you can pass the direst roof inspection.

Explore More